Author Topic: Connector type on NHD-2.7-12864UCY3  (Read 5561 times)


  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Connector type on NHD-2.7-12864UCY3
« on: October 09, 2015, 04:11:39 AM »

I am aware that there is a 20 pin header with a 2.54mm pitch on the board and have used that successfully. However there is a smaller pitch header on the board with a 1mm pitch that is surface mount. This one is vastly superior and using FF cables is what I want to do.

What part number connects to this surface mount header?


  • Administrator
  • Hero Member
  • *****
  • Posts: 308
  • Karma: 16
    • View Profile
Re: Connector type on NHD-2.7-12864UCY3
« Reply #1 on: October 09, 2015, 08:07:04 AM »

Please see the part numbers below:

Molex Part# (20-Pin 1.0mm Pitch Top Contact):

Molex Part# (20-Pin 1.0mm Pitch Bottom Contact):

Feel free to contact me if you have any questions  ;)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: Connector type on NHD-2.7-12864UCY3
« Reply #2 on: May 20, 2016, 01:35:56 PM »
Hi Paul_B,

Are you an employee of Newhaven?

If so, I noticed on a picture of the NHD-2.7-12864UCY3 display, this 1 mm footprint is covered by a sticker. Is this how the boards are sold? I'm concerned from a manufacturing point of view. Is there an option to purchase this board with the 1 mm connector already mounted?


  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Re: Connector type on NHD-2.7-12864UCY3
« Reply #3 on: May 23, 2016, 08:49:59 AM »
Hi Matt,

You would be able to purchase this display with the 1-mm connector soldered on to the display.
Depending on how many you order we can provide a quote for the part.

If you are ordering one or a few you can simply add the following to your cart:
- NHD-2.7-12864UCY3
- Molex_52271-2079
- Soldering Fee (Please add this to the notes)


Parasitic illumination NHD‐2.7‐12864UCY3

Started by HelllisBoard OLEDs

Replies: 0
Views: 2517
Last post July 05, 2017, 04:22:56 AM
by Helllis
NHDev brightness/intensity setting for the SSD1325 controller(NHD-2.7-12864UCY3)

Started by wterryBoard Evaluation Tools

Replies: 0
Views: 4014
Last post August 16, 2016, 08:35:42 AM
by wterry
NHD-2.7-12864UCY3 yellow columns occur under ascii characters

Started by bsoyerBoard OLEDs

Replies: 7
Views: 9912
Last post August 26, 2015, 11:02:25 AM
by tracyb
NHD-2.7-12864UCY3 Uneven brightness depending on neighboring pixels

Started by mikaeleimanBoard OLEDs

Replies: 3
Views: 3931
Last post November 22, 2016, 06:16:42 AM
by mikaeleiman
NHD-2.7-12864UCY3 brightness/contrast adjusting

Started by EK701Board OLEDs

Replies: 3
Views: 6614
Last post January 28, 2016, 09:51:31 AM
by Saurabh_B