Author Topic: C12864WC vs C12864LZ - Driving differences?  (Read 718 times)

bugfixin

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
C12864WC vs C12864LZ - Driving differences?
« on: November 18, 2018, 05:17:14 PM »
Hi, I have a couple of PCBs I've made with extremely similar circuitry, the only difference is in the pinout / connector for the display, a 30 pin flat flex for C12864WC (NHD-C12864WC-FSW-FBW-3V3-M) and a 28 pin 0.05" header for C12864LZ (NHD-C12864LZ-FSW-FBW-3V3-ND).

Both are using a 4x booster circuit with 1uF ceramic caps, resulting in approximately 12.8V on the vout terminal, with the same capacitance on v0-v4, driven via "4-wire" SPI with the same software using the same configuration values.

The C12864WC has MUCH lower contrast, to the point that it's almost invisible, while the C12864LZ works perfectly. The datasheets do not mention any real differences in software settings (at least not that I've seen), is there a significantly different value (electronic volume, etc?) i should be setting for one vs the other?

Alee_S

  • Administrator
  • Jr. Member
  • *****
  • Posts: 46
  • Karma: 0
    • View Profile
Re: C12864WC vs C12864LZ - Driving differences?
« Reply #1 on: December 19, 2018, 03:49:23 PM »
Hello there!

Please note that contrast voltages for both displays differ, as C12864WC calls for around 10.3 V, while C12864LZ calls for 8.5 V. This may be why you are seeing one display work perfectly, while the other is barely visible. This information is available under the electrical characteristics table on their respective datasheets.

Like you mentioned, I would try to change the electronic volume for the C12864WC display, and see if that makes any difference in its appearance. The screenshot below is from the “Table of Commands” from pg. 6 of the datasheet. For command (18), try manipulating the 2nd byte hex value (Electronic Volume Register Set) while staying within its parameters (0x00 – 0x3F), and hopefully that should do the trick!

 


 

Newhaven 128x64 ST7565 LCD NHD-C12864WC-FSW-FBW-3V3-M does not power on reliably

Started by adilmalikBoard Graphic LCDs

Replies: 4
Views: 5653
Last post November 27, 2016, 10:09:36 PM
by samuelproulx
NHD-C12864WC-FSW-FBW-3V3-M random pixels at init

Started by samuelproulxBoard Graphic LCDs

Replies: 3
Views: 4104
Last post November 28, 2016, 02:04:11 PM
by Saurabh_B
C12864WC - Capacitors

Started by bradwBoard Graphic LCDs

Replies: 4
Views: 6561
Last post August 04, 2014, 09:46:53 AM
by bradw
NHD-C12864WC-FSW-FBW-3V3 booster

Started by tafBoard Graphic LCDs

Replies: 7
Views: 7025
Last post March 23, 2016, 03:33:35 AM
by cacio
NHD-C12864WC-FSW-FBW-3V3-M Mounting

Started by davepfzBoard Accessories

Replies: 0
Views: 4558
Last post December 04, 2015, 10:32:14 AM
by davepfz