Author Topic: NHD-7.0-800480EF-ATXL#-CTP Sensitivity in a high EMI environment  (Read 2744 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
We just received 5 of these displays, and are testing with our device with respect to EMI sensitivity.  When our device is pulsed with 2kV spikes on the input power, the touch panel coughs up spurious touches.

Hoping there's register settings that can help increase the controllers input filtering without reducing sensitivity.

We've been looking at ID_G_THPEAK and ID_G_THCAL, although the registers have no real description on behavior.

If you have any suggestions for where to adjust, I'm all ears.


NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 5207
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 4987
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 7872
Last post September 25, 2015, 03:09:24 PM
by Paul_B
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 5759
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
NHD-7.0-800480EF-34 Controller Board vs NHD-4.3-480272MF-34 Controller Board

Started by EdwinSBoard TFTs

Replies: 1
Views: 4564
Last post July 08, 2014, 09:34:55 AM
by Michael_L