Author Topic: NHD-0216Hz-FL-YBW-C  (Read 3474 times)


  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
« on: March 03, 2016, 02:43:52 PM »
I was looking for a small <2" display 16 characters text only and ordered (NHD-0216Hz-FL-YBW-C) for a pre production prototype unit.  Great display but I am unable to handle the small connector that mates to the ribbon cable.  Are there any breakout boards ?? My prototype is all .1 spacing through hole devices.  Production will probably be surface mount but for now that is all I can handle. 


  • Administrator
  • Hero Member
  • *****
  • Posts: 385
  • Karma: 10
    • View Profile
Re: NHD-0216Hz-FL-YBW-C
« Reply #1 on: March 07, 2016, 08:04:10 AM »

The NHD-0216HZ-FL-YBW-C has a 0.1" or 2.54mm pitch thru-hole connection.

Did you mean the NHD-02161Z-FSY-YBW-C?

This display has a 16-POS, 1mm Pitch FFC cable connector, its recommended connector would be the Molex_52207-1685.

We have the NHD-FFC16-1 which is a breakout board with a similar molex connector. The breakout board has a 2x8 0.1" (2.54mm) pitch thru-hole connection.


NHD‐0216HZ‐FL‐YBW‐C adjusting contrast with manufacturer disabled pin

Started by 8510LeoBoard Character LCDs

Replies: 3
Views: 4031
Last post February 27, 2016, 09:13:09 AM
by 8510Leo
NHD-0216HZ-FSW-FBW-33V3C Black Boxes

Started by pepeBoard Character LCDs

Replies: 1
Views: 2596
Last post November 24, 2015, 08:33:32 AM
by Saurabh_B

Started by Saurabh_BBoard OLEDs

Replies: 0
Views: 2740
Last post March 07, 2016, 07:57:11 AM
by Saurabh_B