Author Topic: Capacitive touch panel with FocalTech controller FT6236  (Read 1116 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Capacitive touch panel with FocalTech controller FT6236
« on: October 14, 2016, 12:33:20 AM »
I am using CTP with controller FT6236 - I can get read registers over I2C and also get touch point co-ordinates (x,y values) also can get how many touch points - i.e. 1 or 2. But I am not able to get gesture ID - it always returns 0, I need to get single finger touch gestures like move up, move down, move left, move right or two fingers touch zoom in or zoom out. How can I get this? Are there any register settings that I am missing?
Thanks in advance..


  • Administrator
  • Hero Member
  • *****
  • Posts: 312
  • Karma: 10
    • View Profile
Re: Capacitive touch panel with FocalTech controller FT6236
« Reply #1 on: October 14, 2016, 09:00:48 AM »

Our displays / CTP panels come with the FT5X06 controller.
Doing a quick search I wasn't able to find the register values for this controller.

I would recommend contacting the company you bought that from to see if they have any example code / drivers for this controller.


NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 1716
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐34 Controller Board

Started by mmlquinlanBoard Customer Projects

Replies: 0
Views: 845
Last post November 08, 2016, 12:25:24 PM
by mmlquinlan
NHD‐2.4‐240320SF‐CTXL#‐FTN1 touch-screen problem

Started by hbcelebiBoard TFTs

Replies: 5
Views: 3571
Last post December 10, 2014, 11:19:05 AM
by Michael_L
NHD‐5.0‐800480TF‐34 Controller Board Back Light (B/L Enable)

Started by MidknighTrainBoard TFTs

Replies: 11
Views: 1161
Last post September 14, 2016, 10:30:31 PM
by MidknighTrain
NHD-2.4-240320CF-CTXI#-FT (ST7789S controller) and STM32F4 FSMC LCD Interface

Started by deshayesBoard TFTs

Replies: 1
Views: 2255
Last post March 17, 2016, 06:25:18 PM
by fahad