Author Topic: NHD-4.3xxx-Shield - Vertical Mode  (Read 424 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-4.3xxx-Shield - Vertical Mode
« on: December 16, 2016, 01:37:57 AM »
Is it possible to set any transform / init code to enable the display to function in vertical mode? That is, portrait mode instead of landscape? There's an application I want to use this with that is better suited to have that format, and physical horizontal space is an issue.

I tried using Cmd_Rotate(x); but that only rotates individual bitmaps/letters. For example, if I draw the text "Hello", the individual characters will rotate, but the text will still be drawn in landscape mode.

Any clues? Or will I have to roll my own?


  • Administrator
  • Sr. Member
  • *****
  • Posts: 228
  • Karma: 15
    • View Profile
Re: NHD-4.3xxx-Shield - Vertical Mode
« Reply #1 on: January 09, 2017, 04:16:36 PM »
Orientation switching support was recently added to the second generation FT81x IC's.  Portrait operation is not natively-supported on the FT80X IC's.


NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1355
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 2156
Last post December 15, 2014, 05:12:27 PM
by Michael_L

Started by wb2dybBoard OLEDs

Replies: 3
Views: 2305
Last post July 01, 2015, 09:49:46 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 1398
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Text orientation not changing with Extended Entry Mode Set Register

Started by tekknojoeBoard OLEDs

Replies: 5
Views: 544
Last post January 27, 2017, 10:13:57 AM
by jmadsenee