Author Topic: Max Voltage on NHD-0108CZ-FSW-GBW-33V3  (Read 4529 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Max Voltage on NHD-0108CZ-FSW-GBW-33V3
« on: April 23, 2014, 10:09:34 PM »
The maximum / min VDD voltage on the NHD-0108CZ-FSW-GBW-33V3 isn't specified.  Is is possible to power this display directly off a lithium ion battery (4.2V) when fully charged? If not is there another LCD that would work?  Trying to remove a power supply if possible.  What if VDD was 3.0V, would the display work?



  • Administrator
  • Hero Member
  • *****
  • Posts: 357
  • Karma: 34
    • View Profile
Re: Max Voltage on NHD-0108CZ-FSW-GBW-33V3
« Reply #1 on: April 25, 2014, 09:09:14 AM »
We cannot guarantee reliable operation, nor do we test our displays, at levels higher or lower than what is shown in the spec.  However, the display will most likely operate at those levels (the backlight should not be over-driven).  You may order a sample to test it with your supply to see if it works for you if you like.  But, since you are interested in using a battery for the supply, have you looked at any of our character COG displays?  They draw less current, and can some can be used at those levels.


NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 6739
Last post December 15, 2014, 05:12:27 PM
by Michael_L
NHD-0420H1Z-FL-GBW-33V3 - 2 Lines Mode Problem

Started by gnyturanBoard Character LCDs

Replies: 6
Views: 7313
Last post October 29, 2015, 01:23:58 PM
by Saurabh_B
NHD-0420DZ-FL-YBW LCD Replacement by NHD-0420H1Z-FL-GBW-33V3

Started by sugumar.krishnasamyBoard Character LCDs

Replies: 6
Views: 7370
Last post April 03, 2015, 09:00:45 AM
by Paul_B
NHD-0208AZ-fsn-GBW-33V3 (CG ram characters not displayed

Started by pla.electroBoard Character LCDs

Replies: 0
Views: 1545
Last post June 11, 2018, 04:58:45 AM
by pla.electro

Started by joeaccettaBoard Character LCDs

Replies: 1
Views: 3293
Last post April 23, 2015, 04:32:05 PM
by Paul_B