Author Topic: Particle Photon with NHD-0420CS OLED using I2C  (Read 2531 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Particle Photon with NHD-0420CS OLED using I2C
« on: February 06, 2017, 10:31:45 PM »
I'm looking for Particle Photon wiring diagram for the NHD-0420CS using I2C... and also what driver to use in the Particle Photon IDE.  Anyone have a good example of this and how the wiring was done to the photon to get I2C to work?  I'm short on pins and need to use I2C.  Any help would be appreciated


  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Re: Particle Photon with NHD-0420CS OLED using I2C
« Reply #1 on: February 10, 2017, 03:09:31 PM »

Unfortunately we have not wired this display up with the Particle Photon as of yet, We do have a generic wiring diagram on the datasheet.
What pins do you have available to connect to the display?


16x2 OLED NHD-0216KZW-AY5 Intermittent, and perament vertical dots Brightness

Started by BenB2013Board OLEDs

Replies: 4
Views: 9137
Last post October 23, 2014, 04:55:27 PM
by BenB2013
Display current of 128x64 yellow OLED (2.7-12864UMY3) really 175mA?

Started by flywheelBoard OLEDs

Replies: 1
Views: 7203
Last post June 30, 2014, 04:48:12 PM
by Michael_L
Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board

Started by vcp88Board OLEDs

Replies: 1
Views: 5859
Last post June 07, 2016, 08:20:38 AM
by Saurabh_B
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 2
Views: 5010
Last post December 11, 2016, 11:19:54 PM
by control3
Korean Hex GB code for OLED multi font display NHD-2.7-12864UMY3

Started by newhavenuserBoard OLEDs

Replies: 0
Views: 4674
Last post May 05, 2017, 01:17:45 PM
by newhavenuser