How work with NHD-0216AW-SB3

[Racurs]

Good afternoon! I want to use the NHD-0216AW-SB3 display in my design, but having looked at the instruction set I do not understand how to form them. For example, D / C #, R / W # signals for displays with a SPI interface are not available at all. Is the correct datasheet posted on the site for this display? Is it necessary to somehow generate signals IS, RE, SD?

[Saurabh_B]

Hello Racurs,

The datasheet is set up properly. The D/C# and R/W# bits are set when sending the initial data.
The information for this can be found on page nine of the controller datasheet (LINK).

Please also note that when sending data to this display I you do need to break each byte into half and send 4 bits at a time. This is also explained on page ten of the controller datasheet linked above.