Author Topic: Get Cursor Position Command  (Read 268 times)

dCipher

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Get Cursor Position Command
« on: September 27, 2017, 01:58:29 PM »
Hi

I am using the Serial Liquid Crystal Display Module (4 lines by 20 characters).  It would be very nice if there was a command that would return the cursor position.  This would allow me to handle user input from the keyboard when the entry is more than 20 characters long.  Currently the data wraps to wrong line.  If I knew where the cursor was I could re-position it in those cases.

Thanks,
Simon

 

NHD-C0220BiZ Sometimes Ignoring "Clear Display" Command

Started by dstoverBoard Character LCDs

Replies: 2
Views: 3853
Last post March 27, 2014, 05:41:27 PM
by Michael_L
OLED Display Off Command

Started by AngeloRBoard OLEDs

Replies: 3
Views: 3208
Last post June 16, 2014, 05:45:42 PM
by Michael_L
ILI9341 Command Delay

Started by brybotBoard TFTs

Replies: 2
Views: 2924
Last post November 23, 2014, 10:32:09 AM
by PeterT
What hex command to invert text

Started by andysBoard OLEDs

Replies: 5
Views: 2815
Last post November 26, 2015, 11:08:32 PM
by swadhin
Shift position after "clear screen" instruction

Started by dreissBoard OLEDs

Replies: 5
Views: 3186
Last post September 18, 2015, 03:50:30 PM
by Saurabh_B