Author Topic: NHD-4.3RTP-SHIELD-N Pinout  (Read 830 times)

skmfg

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-4.3RTP-SHIELD-N Pinout
« on: October 17, 2017, 02:30:25 AM »
Hi, I have an Arduino Mega 2560 and the NHD-4.3RTP-SHIELD-N display.
Instead of plugging the shield in, I would want to connect them via wires.

Which pins on the shield need to connect to the Arduino.

Thanks a lot!

Paul_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 287
  • Karma: 17
    • View Profile
Re: NHD-4.3RTP-SHIELD-N Pinout
« Reply #1 on: October 17, 2017, 08:31:08 AM »
Morning,

The 'Pin Description' is listed in the NHD-4.3RTP-SHIELD-N datasheet ( see page 8 ).

http://www.newhavendisplay.com/specs/NHD-4.3RTP-SHIELD-N.pdf

Hope this helps  ;)

 

NHD-4.3CTP-Shield library appears to be invalid

Started by Tim_ColeBoard Evaluation Tools

Replies: 3
Views: 2199
Last post October 22, 2016, 01:11:02 AM
by Tim_Cole
NHD-4.3CTP-Shield -- Hello world example compilation fails

Started by Tim_ColeBoard Evaluation Tools

Replies: 11
Views: 3872
Last post March 26, 2017, 03:58:32 AM
by Tim_Cole
NHD-4.3xxx-Shield - Vertical Mode

Started by talsitBoard Evaluation Tools

Replies: 2
Views: 2506
Last post May 05, 2017, 01:26:07 PM
by CarlW
Graphic software for NHD-4.3CTP-SHIELD-V

Started by igeorgeBoard TFTs

Replies: 1
Views: 1327
Last post June 26, 2017, 08:39:38 AM
by Saurabh_B
NHD-4.3CTP-SHIELD-V - Examples still won't compile

Started by peterfarrowBoard Evaluation Tools

Replies: 3
Views: 383
Last post February 12, 2018, 05:37:24 AM
by peterfarrow