Author Topic: Display Font related issue  (Read 147 times)

darshana

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Display Font related issue
« on: December 27, 2017, 04:58:41 AM »
Sir,
Im working on Newhavens 2.4 inch display (ST7789S controller, 240X320) certain letters on creating font appears to be stepped ( for example W) this letter does not appear to be smooth, similar is the case with other slanting letters, is it the limitation of the hardware that creates this look for the font. Please do reply for the same.

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 367
  • Karma: 10
    • View Profile
Re: Display Font related issue
« Reply #1 on: December 27, 2017, 08:20:51 AM »
Hello Darshana,

Fonts and other graphics are controlled by the software and the controller that write to the display.
The onboard display controller will only show what is loaded onto the RAM.

Could you show me what you are displaying currently for the letters?

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 5078
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 6411
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3973
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 10141
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 6217
Last post June 18, 2014, 10:09:49 AM
by Michael_L