Author Topic: NHD-FT81x-SHIELD  (Read 152 times)


  • Newbie
  • *
  • Posts: 9
  • Karma: 1
    • View Profile
« on: January 02, 2018, 10:40:46 AM »
Was able to get the NHD-FT81x-SHIELD plugged into a NHD-7.0-800480FT-CSXV-CTP  :)

Downloaded the github zip folder. Renamed the folder as directed.

Although the github download didn't work for me like a typical arduino library, I was able to run the 7" example sketches successfully, by manually locating the "ino" file

Is the github software supposed to be a typical arduino library and I did something wrong?

Is there a way to use the EVE screen editor to output arduino code? After I change the chip to FT813, the export option wasn't working for me.
Again, I might be doing something wrong.




  • Administrator
  • Hero Member
  • *****
  • Posts: 253
  • Karma: 16
    • View Profile
« Reply #1 on: January 03, 2018, 08:47:37 AM »
Hey Carl!

The select example projects on our GitHub page are Arduino Sketches. You don't need to import it as a traditional Arduino Library. 

Regarding the EVE Screen Designer, I don't believe there is an option at this time to output Arduino code for the FT813 IC.  However, you should be able to make it output C code and modify it to run on the Arduino IDE.

Hope this helps!


NHD-4.3CTP-Shield library appears to be invalid

Started by Tim_ColeBoard Evaluation Tools

Replies: 3
Views: 1639
Last post October 22, 2016, 01:11:02 AM
by Tim_Cole
NHD-4.3CTP-Shield -- Hello world example compilation fails

Started by Tim_ColeBoard Evaluation Tools

Replies: 11
Views: 2896
Last post March 26, 2017, 03:58:32 AM
by Tim_Cole
NHD-4.3xxx-Shield - Vertical Mode

Started by talsitBoard Evaluation Tools

Replies: 2
Views: 1863
Last post May 05, 2017, 01:26:07 PM
by CarlW
Graphic software for NHD-4.3CTP-SHIELD-V

Started by igeorgeBoard TFTs

Replies: 1
Views: 865
Last post June 26, 2017, 08:39:38 AM
by Saurabh_B

Started by Paul_BBoard Customer Projects

Replies: 0
Views: 938
Last post May 03, 2017, 11:36:34 AM
by Paul_B