Author Topic: NHD-0420CW-A*3 VDD Voltage level  (Read 572 times)

JBDynamics

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
NHD-0420CW-A*3 VDD Voltage level
« on: February 13, 2018, 10:23:28 AM »
I am integrating this character OLED into a custom automotive gauge board. I need to know if VDD has to be exactly 2.8V or if the 3.3V I/O and power supply from an MCU/MPU like a Teensy 3.5 will work as well? If not would it be better to translate to 5V? I already have 3.3V->5V translation in the schematic to begin with so that would be easiest to implement. If it makes a difference, I am using the SPI interface.

Ted_M

  • Administrator
  • Jr. Member
  • *****
  • Posts: 32
  • Karma: 2
    • View Profile
Re: NHD-0420CW-A*3 VDD Voltage level
« Reply #1 on: February 14, 2018, 09:03:49 AM »
3.3V is ok to use for VDD on this display.

JBDynamics

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: NHD-0420CW-A*3 VDD Voltage level
« Reply #2 on: February 14, 2018, 04:35:24 PM »
Thanks, that is a huge relief. I assumed it would and created a schematic based on the fact it would, and I routed and designed the PCB and ordered them to be made. Then I was going back over the documentation to build a prototype to write the code for it, and realized a half of a voltage is a pretty big difference so I thought it would be prudent to double check this will work.

 

NHD‐0420CW‐AB3 I2C Interface

Started by andersonpdBoard OLEDs

Replies: 1
Views: 3772
Last post January 23, 2015, 10:00:06 AM
by Michael_L
NHD‐0420CW‐AG3 Contrast question

Started by RichardRBoard OLEDs

Replies: 2
Views: 3432
Last post January 16, 2016, 09:52:02 AM
by RichardR
NHD‐0420CW‐AG3: blinking part of text?

Started by RichardRBoard OLEDs

Replies: 2
Views: 3526
Last post February 28, 2017, 03:27:02 PM
by BobG
NHD‐0420CW‐AG3 + I2C + PIC assembly code: trouble getting started

Started by RichardRBoard OLEDs

Replies: 4
Views: 4923
Last post December 17, 2015, 03:12:49 AM
by RichardR
NHD-0420CW-Ax3 Driver (w/demo) written for Parallax P8X32A/Propeller MCU

Started by avsa242Board OLEDs

Replies: 1
Views: 722
Last post January 09, 2018, 04:48:45 PM
by Paul_B