Author Topic: NHD-C12864LZ-FSW-FBW-3V3 correct Vout voltage  (Read 719 times)

Spero

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-C12864LZ-FSW-FBW-3V3 correct Vout voltage
« on: June 12, 2018, 11:53:22 PM »
Hi...

I'm using a NHD-C12864LZ-FSW-FBW-3V3 LCD with the following configuration:
  Vdd=3.1V
  1uF caps on the CAPxx and Vx pins (4 x voltage booster circuit)
  SPI mode
  /WR, /RD and C86 = Vdd
  PS = 0V

After initialization, the Vout pin = 1.44V whilst the Vx pins are all lower than this (~1.3V)

What should the Vout pin voltage be - 1.44V seems too low?
The display is completely blank after setting the all points on command (0xA5)

Thanks,
Spero


 

interface voltage levels for NHD-0420CW

Started by oldmakerBoard OLEDs

Replies: 3
Views: 3929
Last post February 12, 2015, 01:56:20 PM
by Paul_B
NHD-0108CZ-FSW-GBW-33V3 contrast voltage

Started by perkyBoard Character LCDs

Replies: 3
Views: 3773
Last post February 12, 2016, 04:01:29 PM
by perky
Supply voltage for KZW series OLED

Started by MustardManBoard OLEDs

Replies: 5
Views: 2971
Last post August 25, 2017, 08:09:31 AM
by Saurabh_B
NHD-7.0-800480EF-20 Voltage Levels

Started by John_DaileyBoard TFTs

Replies: 2
Views: 3962
Last post April 23, 2014, 08:16:29 AM
by John_Dailey
Max Voltage on NHD-0108CZ-FSW-GBW-33V3

Started by kj301Board Character LCDs

Replies: 1
Views: 3691
Last post April 25, 2014, 09:09:14 AM
by Michael_L