Author Topic: Custom Characters does not get Displayed Correctly  (Read 2474 times)


  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Custom Characters does not get Displayed Correctly
« on: May 17, 2018, 12:24:37 AM »
I am using 8x2 LCD NHD-0208AZ-FSW-GBW-33V3. I want to print a custom character on the display. But the display always displays a specific incorrect character. CGRAM Address - 0x40.  Attached the pattern below.


Character LCD NHD‐0220D3Z‐NSW‐BBW‐V3 not receiving correct characters

Started by davekBoard Character LCDs

Replies: 1
Views: 6262
Last post March 25, 2016, 05:23:05 PM
by Saurabh_B
NHD-2.7-12864UCY3 yellow columns occur under ascii characters

Started by bsoyerBoard OLEDs

Replies: 7
Views: 9587
Last post August 26, 2015, 11:02:25 AM
by tracyb
NHD-C0220BiZ-FSW-FBW-3V3M NAKs all odd numberd ASCII characters

Started by majorninthBoard Character LCDs

Replies: 7
Views: 8824
Last post May 28, 2015, 04:51:31 PM
by Michael_L
Generating characters of size more than 8x8 pixels on NHD-320240WG-BoTFH-VZ#

Started by harshal6905Board Graphic LCDs

Replies: 1
Views: 1908
Last post October 07, 2018, 05:52:10 PM
by 0x0ff0
NHD-0420E2Z-NSW-BBW is displaying Japanese Characters instead of my string

Started by shaneyostBoard Character LCDs

Replies: 1
Views: 8713
Last post June 03, 2014, 10:11:25 AM
by Michael_L