NHD-3.12 SSD1322 serial synchronization reset

[atdown]

Good morning, quick question as my first post.  I'm working with a NHD-3.12 and my embedded system power rails bounce for several mS when i turn the system on.  I've noticed this causes varied and random errors on my OLED.  I was wondering if the serial synchronization of the controller is reset every CS edge, or if only the RESET line can reset the serial sync.  I think that the startup noise clocks in a few bits, then when i go to transmit a command what i think is bit-0 isn't anymore.

Thanks!
-Alexander