Author Topic: NHD-5.0-800480TF-ATXL linux driver code  (Read 4942 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-5.0-800480TF-ATXL linux driver code
« on: March 27, 2015, 03:52:21 AM »
Good Day!.

I'm trying to integrate the NHD-5.0-800480TF-ATXL with our development board with a Phytec 052 SOM.
I would like to ask if we have some linux driver code where i can use.
If not, can you guide me where to start.



  • Administrator
  • Hero Member
  • *****
  • Posts: 308
  • Karma: 16
    • View Profile
Re: NHD-5.0-800480TF-ATXL linux driver code
« Reply #1 on: March 27, 2015, 08:20:26 AM »

Iím sorry, unfortunately we do not have any Linux drivers available for the TFT, except for the FocalTech CTP drivers.

I am not to familiar with the Phytec 052 SOM, does this board have a built in TFT controller? If not you will need to use an external one.  There are several TFT controllers on the market (the SSD193 being one of them) so you may use whatever you prefer.

Finally, I highly recommend checking out Phytec's wiki page, I'm sure you will find some useful information.

Hope this helps!


NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 1
Views: 6966
Last post February 05, 2016, 08:05:40 AM
by Paul_B
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 6970
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 10589
Last post September 25, 2015, 03:09:24 PM
by Paul_B
help! NHD-4.3-480272EF-ATXL#-T touch panel rotates 90 degrees

Started by knightsunBoard TFTs

Replies: 3
Views: 4608
Last post September 26, 2016, 11:58:01 PM
by knightsun
Sample Code Question for NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM LCD

Started by SteveCBoard Character LCDs

Replies: 2
Views: 7954
Last post July 31, 2014, 08:44:29 PM
by SteveC