Author Topic: NHD-7.0-800480EF-ATXL#-CTP touch controller  (Read 2909 times)


  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
NHD-7.0-800480EF-ATXL#-CTP touch controller
« on: August 05, 2015, 08:39:49 AM »

We bought an NHD-7.0-800480EF-ATXL#-CTP for evaluation. We usually use another TFT with an FT5406 touch panel controller. However, we were not able to get any answer from the IC controller on the NHD panel.

After inspection, we have seen that the IC on the NHD display has 56 pins and no marking while the FT5406 on our usual display has 68 pins and a clear FT5406 marking. The FT5x06 datasheets indicates that the FT5406 has a 68 pins package.

Do you use some FT5406 in a non standard package or is it a different TP controller?

Thank you,



  • Administrator
  • Hero Member
  • *****
  • Posts: 357
  • Karma: 34
    • View Profile
Re: NHD-7.0-800480EF-ATXL#-CTP touch controller
« Reply #1 on: August 05, 2015, 09:59:15 AM »
The controller IC on our 7.0" CTP is the FT5406.  Are you certain the pinout between your old touch panel and ours is the same?  Are you able to run an I2C scan test to see if you can get an ACK from the slave address 0x70?  Are you keeping pin 6 (/RESET) pulled HIGH?
Also, although both versions are compatible with one another, the CTP you have of ours is the old model. Attached is a picture of the current model.

« Last Edit: August 05, 2015, 10:07:34 AM by Michael_L »


  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: NHD-7.0-800480EF-ATXL#-CTP touch controller
« Reply #2 on: August 05, 2015, 10:20:36 AM »
Thank you for your answer. We finally could get some answers from the TP, the problem was on our interface board and we were distracted by this strange looking FT5406.


NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 3416
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 5785
Last post September 25, 2015, 03:09:24 PM
by Paul_B
NHD‐3.5‐320240MF‐34 Controller Board

Started by mmlquinlanBoard Customer Projects

Replies: 0
Views: 3022
Last post November 08, 2016, 12:25:24 PM
by mmlquinlan
NHD-5.0-800480TF-ATXL#-CTP why don't typical timing values work?

Started by jkelleherBoard TFTs

Replies: 2
Views: 3865
Last post August 31, 2015, 05:08:45 AM
by jmag999
NHD-3.5-320240MF-ATXL#-CTP-1 Ft5x06 Linux device tree

Started by rajarajan.rBoard TFTs

Replies: 1
Views: 3580
Last post July 05, 2016, 01:21:43 PM