Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: amitkumarsharma008 on February 11, 2016, 02:17:53 AM

Title: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano
Post by: amitkumarsharma008 on February 11, 2016, 02:17:53 AM
Hi  NewHeaven team,

I am new to Arduino world and currently using the OLED display of 0.96 inch (VCC, GND, SCL, SDA) with arduino nano. Now when I came to your website, i find intresting colour OLED's (NHD-1.69-160128ASC3 - ssd1351/seps25) but i want to know exact wiring to be done with Arduino nano. I tried to search any tutorial etc on the internet but unable to do so. I search data sheets but its currently difficult to understand.
If I get this information clearly i will go ahead and buy this oled display and will be useful for my project.
I have one more serial device as GPS receiver also connected to arduino nano. So please consider that while replying. I can not use the shield for arduino uno because it increases the size of my project.

Thanks for your help in advance !!
Title: Re: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano
Post by: Paul_B on February 11, 2016, 08:33:43 AM
Morning,

The Arduino Nano is a compact and breadboard-friendly version board based on ATmega328 processor. It is more or less same functionality as the Arduino UNO but in different package (which means it won't accept any shields designed for the UNO). However since you are using NHD-1.69-160128ASC3 you can simply breadboard your project  8)

First check out the pin-out diagram for the Arduino Nano.
Link: http://bit.ly/1PF7FLp

We provide getting started code, however it is configured for the Arduno Uno. You will need to modify the sketch with the following pin configuration:

https://github.com/NewhavenDisplay/NHD-1.69-160128ASC3_Example/blob/master/examples/test/test.ino

Code: [Select]
Hardware: (Note most of these pins can be swapped)
    Color OLED Pin----------------Arduino Pin
       MOSI       ----------------  15
       SCK        ----------------  17
       DC         ----------------  12
       RESET      ----------------  13
       OLEDCS     ----------------  14
       Vin        ----------------  5V or 3.3V
       GND        ----------------  GND

Feel free to follow along with our Serial Color OLED User Guide, the only difference is you are using an Arduino Nano and will be wiring your display slightly different.

http://www.colorarduino.newhavendisplay.com/userguides/NHD-1.69-160128ASC3_User_Guide.pdf

Hope this helps!

Title: Re: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano
Post by: amitkumarsharma008 on March 19, 2016, 12:28:58 AM
Thanks a lot !!

I am able to successfully do the connection.

Now I want a small clarification regarding "NHD-1.5-128128ASC3" and "NHD-1.5-128128UGC3".

NHD-1.5-128128ASC3 have MOSI pin and NHD-1.5-128128UGC3 have SDIN as pin8.

So are they equivalent ?

Thanks & Regards,
Amit
Title: Re: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano
Post by: Paul_B on March 23, 2016, 03:38:11 PM
Not a problem Amit,  "SDIN" stands for Serial Data In

e.g. MOSI

Enjoy your new display!