Newhaven Display Forum

Newhaven Products => OLEDs => Topic started by: vcp88 on June 07, 2016, 01:49:52 AM

Title: Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board
Post by: vcp88 on June 07, 2016, 01:49:52 AM
I am using the NHDev v2.10 development board and OLED NHD1.5128128ASC3ND Display but i am finding the firmware flashed
on NHDev development board is not sending appropriate data to NHD1.5128128ASC3ND OLED Display through SPI Interface
and nothing appears on the Display. Can anyone inform me whether these devices are compatible with each other or whether i have to flash some other firmware on to the NHDev Development Board
Title: Re: Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board
Post by: Saurabh_B on June 07, 2016, 08:20:38 AM
Hi,

The NHD-1.5-128128ASC3 is not compatible with our development board.
However you would be able to evaluate and program it with an Arduino using our Arduino Shield.

You can get more information about this here:
Arduino Shield: http://www.newhavendisplay.com/nhd15aushield-p-9481.html
1.5" Arduino Code: https://github.com/NewhavenDisplay/NHD-1.5-128128ASC3_Example

You will however need to supply your own Arduino, You can directly connect this display to the Arduino UNO.