Newhaven Display Forum

Newhaven Products => Graphic LCDs => Topic started by: desm on February 27, 2018, 07:47:11 AM

Title: Any issue powering the NHD-C12864WO-B1TFH#-M from 3.3V?
Post by: desm on February 27, 2018, 07:47:11 AM
Hello,
the datasheet says it can be powered between 2.7V and 3.3V:

http://www.newhavendisplay.com/specs/NHD-C12864WO-B1TFH-M.pdf

The microcontroller is powered from 3.3V, I would like to use a single power source for both.

Since I want to use it in an always-on application, I would like to know if there are potential issues (or something I should be aware of) using 3.3V power, or if 3.0V is recommended and I'll have to use a voltage translator.

Thanks.
Title: Re: Any issue powering the NHD-C12864WO-B1TFH#-M from 3.3V?
Post by: Ted_M on February 27, 2018, 09:03:40 AM
The NHD-C12864WO-B1TFH#-M display can be powered safely by 3.3v so a single power source can be used for your application.