Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - wadeh

Pages: [1]
Understood.  I was planning on mounting the display directly to the front panel of a power supply I'm building.  I thought I would investigate mounting it behind a an aluminum front panel.  This means I either have to use a cable directly from the display or have it mounted to an intermediate board that is then mounted to the front panel.

Thanks for the prompt reply.


Given the LED backlight pins are what appears to be a non standard pitch (3mm) and size (~1.45mm), what are my options for a cable to connect to another board?

Sorry if this is a silly question and something I should know.


Pages: [1]