Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - REO

Pages: [1]
Evaluation Tools / Re: NHD-7.0CTP-CAPE-N Picture offset
« on: May 09, 2017, 03:58:38 AM »
Hi Paul

I have been hung up on other projects at work.
But it would be great to get the patch files. :)

Regards Rasmus

Evaluation Tools / NHD-7.0CTP-CAPE-N Picture offset
« on: April 28, 2017, 01:51:22 AM »

I have now managed to get picture on the NHD-7.0CTP-CAPE-N
But as I'm using the terminal the picture randomly shift to the left. (as seen on the picture)
and on a random key stroke it shift back. It can also shift back by letting the screen go black due to inactivity. And then when I wake it back up with a keystroke it is fine.

I guess you have a bug in your "Driver"...

Regards Rasmus

Evaluation Tools / Re: NHD-7.0CTP-CAPE-N no picture
« on: April 27, 2017, 07:51:32 AM »
Hi Paul

I now got the Ubuntu 14.04 kernel 3.8 image from the NHD website to work. And that give me image on the screen. But When I try to flash it to the eMMC, it "freeze" with a picture of Tux in the upper left corner of the screen with USER LED2 constant lit...

When I edit uEnv.txt I get the following:

  GNU nano 2.2.6            File: /boot/uEnv.txt







##enable BBB: eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync

In order to enable the eMMC flasher I edit the last line to:

I then Power off the BBB, press and hold the "boot button" and power on the BBB. When the all four user LED's haw come on and turn off again I release the "Boot Button".
And then it "freezes" with a picture of Tux...

Is there a nother way to get this image to the eMMC?

Regards Rasmus.

Evaluation Tools / NHD-7.0CTP-CAPE-N no picture
« on: April 26, 2017, 09:34:37 AM »

I'm trying to run the NHD-7.0CTP-CAPE-N with my BeagleBoneBlack. But so far I have not been able to get a picture on the screen.
I have tried running the latest Debian 8.7 image (From, Ubuntu 14.04 Kernel 3.8 (recomended by NHD) and Ubuntu 16.04.2 kernel 4.4.59-ti-r96.

How do I check that the Cape is "read" correct by the BBB?

Regards Rasmus.

Pages: [1]