Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - vserov

Pages: [1]
1
Customer Projects / Re: Beaglebone LCD cape.
« on: October 25, 2014, 03:53:28 AM »
Everything that needs for start is here
http://elinux.org/Nh5cape
http://elinux.org/Nh5capeSoftware
http://elinux.org/Nh7Cape
http://elinux.org/Nh7capeSoftware

2
Customer Projects / Re: Beaglebone LCD cape.
« on: September 22, 2014, 04:46:13 PM »
LCD 7 cape.
NHD-7.0-800480EF-ATXL-CTP
http://youtu.be/eEUCvN5GeIE

3
TFTs / Re: NHD-7.0-800480EF-ATXL#-CTP dead?
« on: September 17, 2014, 05:43:55 AM »
Inverting pixel clock affects only picture quality. You should see the picture anyway. Try to check your DEN signal. It should conform the datasheet.

4
Customer Projects / Beaglebone LCD cape.
« on: September 07, 2014, 12:38:13 AM »
I want to introduce my project with NHD-5.0-800480TF-ATXL#-CTP
Beaglebone LCD cape.
http://elinux.org/Nh5cape
Linux 3.8, 3.15 and rowboat android.
The 7" LCD is coming very soon.

5
TFTs / Re: NHD-7.0-800480EF-ATXL#-CTP dead?
« on: September 06, 2014, 01:40:58 PM »
I confirm that it works with using DEN and inverting pixel clock. 8)
I didn't touch R4. I just provided signal DEN from CPU.
Thank you.

6
TFTs / Re: NHD-7.0-800480EF-ATXL#-CTP dead?
« on: August 29, 2014, 01:33:47 PM »
Just tried another LCD - the same result. So it is something with init sequence or some difference that I missing. My controller works perfect with NHD-5.0-800480TF-ATXL#-CTP
My question is - what the role of DEN signal? I grounded it in NHD-5.0-800480TF-ATXL#-CTP and also here.
And in the power sequence diagram you mention signals: AVDD, RSTB, STBYB, VSD. I can't find them at the LCD connector. What is important in power sequence?

7
TFTs / Re: NHD-7.0-800480EF-ATXL#-CTP dead?
« on: June 04, 2014, 05:37:48 AM »
I have my own controller. I tried to change parameter in my module "pixelclk-active <1>" to "pixelclk-active <0>". No change.
Can you confirm that it is the same pinout and timings as 5 inch LCD?

8
TFTs / NHD-7.0-800480EF-ATXL#-CTP dead?
« on: June 03, 2014, 02:13:12 PM »
Just received this LCD from mouser. According to Datasheet it has the same pinout, voltage and timings as NHD-5.0-800480TF-ATXL#-CTP. When I connect this LCD to controller that works with 5" LCD - I see white backlight with vertical lines on it.
Can you suggest something?
Thanks.

Pages: [1]