Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - luisvalseca

Pages: [1]
OLEDs / Re: Too much current in sleep mode
« on: July 17, 2017, 09:38:23 AM »
Hi Saurabh_B,
I do not understand what you mind with "It often draws more current when its not being powered.", in my aplication, i need to sleep the microcontroller and spend the minimum possible current
while it is sleeping, but the display spend 750 uA after 0xAE command and i do not what to do , because that current is a lot when the microcontroller is sleeping.
What can i do to reduce this consumption?.

Luis Valseca

OLEDs / Too much current in sleep mode
« on: July 17, 2017, 05:20:25 AM »
I am using  " NHD‐2.23‐12832UCB3 Graphic OLED Display Module ",  and it is configured as I2C, but in sleep mode, the current is about 750 uA and in the documentation of this module
must be between 3 and 15 uA. Could  someone help me to know why this happens.
Waiting for an answer, best regards

Luis Valscea

OLEDs / problem with NHD‐2.23‐12832UCB3
« on: January 21, 2017, 08:50:56 AM »
 when I write on the display, some of the characters are reflected from the top line, down and vice versa. Can someone help me. I attach a photo.

[attachment deleted by admin]

Pages: [1]