Author Topic: NHD-7.0-800480EF-34 Controller Board vs NHD-4.3-480272MF-34 Controller Board  (Read 4608 times)


  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
I will buy a NHD-7.0-800480EF-ATXL#-CTP screen with a controller board. From another project I have a controller board (NHD-4.3-480272MF-34 Controller Board). So I compared this board with the 7.0 inch controller board an the pin out from both are the same. Also the used chip is the same. Can I use the 4.3 inch controller board for my 7 inch display? anyone who has tried this?



  • Administrator
  • Hero Member
  • *****
  • Posts: 357
  • Karma: 34
    • View Profile
Yes, you can use that board with the 7.0" display since the controller IC is the same, and the pinout is also the same.  However, the difference will be seen in the backlight.  The 7.0" display has different backlight requirements, and the backlight driver circuits between the 4.3" and 7.0" controller boards are different.  The display will still work, but the backlight will not be as bright as it should.


NHD-7.0-800480EF-ASXV#-CTP - "Touch" stopped working on part of LCD

Started by coran21Board TFTs

Replies: 1
Views: 723
Last post February 19, 2019, 11:20:53 AM
by Sergio_M
NHD-7.0-800480EF-ATXV-CTP step/iges file request

Started by lakshminarayananBoard TFTs

Replies: 1
Views: 3659
Last post July 24, 2015, 11:25:39 AM
by Paul_B
MOVED: working with nhd-7.0-800480ef-asxv-t with buildroot framebuffer

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 2254
Last post November 16, 2017, 08:14:59 AM
by Saurabh_B
NHD-7.0-800480EF-ATXV#-CTP touch screen details

Started by lakshminarayananBoard TFTs

Replies: 1
Views: 4347
Last post June 24, 2014, 10:33:38 AM
by Michael_L
MOVED: NHD-7.0-800480EF-ATXV#-CTP dull display

Started by Michael_LBoard Customer Projects

Replies: 0
Views: 4204
Last post November 20, 2014, 09:07:17 AM
by Michael_L