Author Topic: Mounting Question for .050" pitch LCD connector  (Read 615 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Mounting Question for .050" pitch LCD connector
« on: August 15, 2018, 02:11:25 PM »
I was wondering if anyone has any thoughts on connectors to mount a NHD-0220FZ-FSW-GBW-P . This module has .050 " pitch . On one side it has pins mounted. The other is open so I could put my own on there.  I wanted to mount the module directly to my main circuit board without a cable. Also I want it to sit up about 0.5" off the board so other components on the board are cleared. I am having trouble finding a header that tall in the .050" pitch. Just wondering if others have run into this and had any clever but reliable solutions.


Sample Code Question for NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM LCD

Started by SteveCBoard Character LCDs

Replies: 2
Views: 5713
Last post July 31, 2014, 08:44:29 PM
by SteveC
NHD‐0420CW‐AG3 Contrast question

Started by RichardRBoard OLEDs

Replies: 2
Views: 4513
Last post January 16, 2016, 09:52:02 AM
by RichardR
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 3966
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
How do I stack a DAC shield between a 4.3" LCD Display and an Arduino Mega 2560?

Started by wa6htpBoard Customer Projects

Replies: 1
Views: 744
Last post September 19, 2018, 09:14:45 AM
by Ted_M
16-bit controller Board (SSD1963) for 5.7" QVGA TFT display

Started by erpsBoard Evaluation Tools

Replies: 1
Views: 5888
Last post September 17, 2015, 02:25:46 PM
by Saurabh_B