Author Topic: NHD-5.0-800480TF-ATXL-CTP Yellow Tint  (Read 2844 times)

jmag999

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« on: August 31, 2015, 08:03:41 PM »
There is a distinct yellowing on my display.  Not sure why.  All of the colors are there, but there is a yellow tint over areas, especially a band through the middle 1/3 of the display.  Any idea what can cause this?

jmag999

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #1 on: September 01, 2015, 07:03:05 PM »
Any help on this?

jmag999

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #2 on: September 01, 2015, 08:38:06 PM »
As an update, I also have the NHD-7.0-800480.  I hooked this up just to see, and it does not have the same issue.  Do I have a faulty 5" display?

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #3 on: September 02, 2015, 07:58:00 AM »
Hi,

I was wondering if you could post a picture of the 7" display to see what the original image is supposed to look like, and also if you have tried this with another 5" display.

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #4 on: September 02, 2015, 08:29:18 AM »
As Saurabh has suggested, please try another 5.0" display (if you have one) to see if it is unique to the one 5.0" display you've tried.  Another thing to try would be inverting your pixel clock polarity (the 5.0" and 7.0" TFTs have opposite PCLK polarities).

jmag999

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #5 on: September 02, 2015, 09:43:04 AM »
Thanks.  I did try inverting the pixel clock with no change.  I have 4 more 5" displays on the way.  I will post a picture of the 7" tonight and also report back when the new 5" arrives.

jmag999

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD-5.0-800480TF-ATXL-CTP Yellow Tint
« Reply #6 on: September 06, 2015, 05:13:21 AM »
I can confirm that the new batch of displays works fine with no code changes.  The new one is a Rev 14.  The old one does not have a Revision, but is pretty different even down to the flex circuit.

 

NHD‐3.5‐320240MF‐ATXL#‐T‐1 Touch Signal

Started by jmasamotoBoard TFTs

Replies: 4
Views: 2127
Last post November 23, 2017, 08:14:30 PM
by tolikkk
NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1953
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 3
Views: 3449
Last post Today at 05:56:44 PM
by tolikkk
NHD-3.5-320240MF-ATXL#-CTP-1 Ft5x06 Linux device tree

Started by rajarajan.rBoard TFTs

Replies: 1
Views: 2433
Last post July 05, 2016, 01:21:43 PM
by UART
help! NHD-4.3-480272EF-ATXL#-T touch panel rotates 90 degrees

Started by knightsunBoard TFTs

Replies: 3
Views: 1231
Last post September 26, 2016, 11:58:01 PM
by knightsun