Author Topic: NHD-7.0-800480EF-ATXV#-CTP power supply  (Read 1683 times)

LarryG

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
NHD-7.0-800480EF-ATXV#-CTP power supply
« on: September 24, 2015, 09:08:57 AM »
The display data sheet lists the nominal supply for the CTP as 3.0v with min/max values of 2.8/3.3v.  But the FT5x06 touch controller used is spec'd for 2.8/3.6v.  Why the apparent discrepancy?  Can I power both the TFT and the CTP from a nominal 3.3V?

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 355
  • Karma: 10
    • View Profile
Re: NHD-7.0-800480EF-ATXV#-CTP power supply
« Reply #1 on: September 24, 2015, 09:23:19 AM »
Hi Larry,

You shouldn't have any issues running both at 3.3V

 

NHD-7.0-800480EF-34 Controller Board vs NHD-4.3-480272MF-34 Controller Board

Started by EdwinSBoard TFTs

Replies: 1
Views: 2753
Last post July 08, 2014, 09:34:55 AM
by Michael_L
NHD-7.0-800480EF-20 Controller Board and the backlight on a 800x480 LCD Display

Started by dfanslerBoard TFTs

Replies: 1
Views: 2437
Last post July 27, 2015, 10:08:23 AM
by Saurabh_B
MOVED: working with nhd-7.0-800480ef-asxv-t with buildroot framebuffer

Started by Saurabh_BBoard Graphic LCDs

Replies: 0
Views: 18
Last post November 16, 2017, 08:14:59 AM
by Saurabh_B
Question about FT5x06 controller (NHD-7.0-800480EF-ATXL-CTP)

Started by DominusDRRBoard TFTs

Replies: 5
Views: 3732
Last post May 15, 2015, 10:04:11 AM
by DominusDRR
NHD-7.0-800480EF-ATXL#-CTP Sensitivity in a high EMI environment

Started by cborlaseBoard TFTs

Replies: 0
Views: 1544
Last post February 16, 2016, 04:45:19 PM
by cborlase