Author Topic: Setting SPI mode for NHD-0429D3Z-NSW-BBW  (Read 2109 times)

tomr

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Setting SPI mode for NHD-0429D3Z-NSW-BBW
« on: October 21, 2015, 06:43:03 PM »
I'm trying to configure the display for SPI mode and the spec sheet says to install jumper R2.  On the backside I see silkscreen labels for R1 and R2 and a bunch (10) small solder pads. Can anyone explain (or have a picture) where exactly the jumper needs to be installed?

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Re: Setting SPI mode for NHD-0429D3Z-NSW-BBW
« Reply #1 on: October 22, 2015, 11:54:24 AM »
Hi,

I you'll want to solder the jumper I marked in the following picture.

tomr

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: Setting SPI mode for NHD-0429D3Z-NSW-BBW
« Reply #2 on: October 22, 2015, 01:13:11 PM »
My layout looks a bit different but I believe I got it. Can you check my picture and confirm? Thanks.

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Re: Setting SPI mode for NHD-0429D3Z-NSW-BBW
« Reply #3 on: October 23, 2015, 08:19:23 AM »
Yes, that is where you would want to place a jumper. The board has recently been changed and I wasn't sure if you had the older or newer design.

 

NHD‐3.5‐320240MF‐ATXL#‐CTP‐1 Problem with standby mode

Started by guenterBoard TFTs

Replies: 0
Views: 1945
Last post June 16, 2016, 12:14:36 PM
by guenter
NHD-0420H1Z-FL-GBW-33V3 pull-ups and pull-downs in 4 bit mode

Started by richardwrightBoard Character LCDs

Replies: 3
Views: 3010
Last post December 15, 2014, 05:12:27 PM
by Michael_L
NHD0420CW-A*3 tHREE LINE MODE, MIDDLE LINE DOUBLE HEIGHT

Started by wb2dybBoard OLEDs

Replies: 3
Views: 3114
Last post July 01, 2015, 09:49:46 AM
by Paul_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 2167
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Text orientation not changing with Extended Entry Mode Set Register

Started by tekknojoeBoard OLEDs

Replies: 5
Views: 1404
Last post January 27, 2017, 10:13:57 AM
by jmadsenee