Author Topic: FT5406 scan rate  (Read 3599 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
FT5406 scan rate
« on: November 05, 2015, 08:19:26 AM »
Hello. I use the tft module with FT5406 touch controller. There is no information in datasheet about how to increase scan rate. There is only this "Active mode
When in this mode, the chip actively scans the panel. The default scan rate is 60 frames per
second. The host processor can configure FT5x06 to speed up or to slow down."     What should i do to set up scan rate to 100fps, for example?


NHD-1.5-128128UGC3 Maximum Frame Rate

Started by rbairos@gmail.comBoard OLEDs

Replies: 1
Views: 3066
Last post February 09, 2016, 08:51:29 AM