Author Topic: Double Width Font NHD-0216CW  (Read 1044 times)

MatthewKerr

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Double Width Font NHD-0216CW
« on: October 28, 2018, 12:01:48 AM »
Hi. I have read that the NHD-0216CW supports double height font. Does it support double height double width font?

I am replacing eight seven segment (plus dot) displays with the NHD-0216CW. I am trying to work out if I can configure the NHD-0216CW to use fonts which appear as close as possible to my original 8x seven segment display i.e. each character is double height double width.

Thanks.

Ted_M

  • Administrator
  • Full Member
  • *****
  • Posts: 132
  • Karma: 5
    • View Profile
Re: Double Width Font NHD-0216CW
« Reply #1 on: November 02, 2018, 10:40:14 AM »
Hi Matthew,

Unfortunately the US2066 controller does not support double width characters, however there is an option to set a 6-dot width character vs. a 5-dot character in the Extended function set command list. (pg. 7 of the datasheet) http://www.newhavendisplay.com/specs/NHD-0216CW-AW3.pdf

Best Regards,

 

NHD-0216CW-AY3 8-bit Parallel 8080, Text on Display Issue

Started by forteyBoard OLEDs

Replies: 14
Views: 14644
Last post March 09, 2015, 02:23:51 PM
by Retheesh_M
Weird display on NHD-0216CW-AG3 when using Arduino LiquidCrytal library

Started by alfaudioBoard OLEDs

Replies: 1
Views: 997
Last post May 17, 2019, 12:50:25 PM
by Alee_S
Safe to run NHD-0216CW-AB3 displays at 3.3V long-term?

Started by bluemountainBoard OLEDs

Replies: 2
Views: 5660
Last post January 14, 2015, 12:19:16 PM
by bluemountain
NHD-0216CW-AB3 dots underneath characters

Started by cprobertBoard OLEDs

Replies: 0
Views: 3675
Last post November 19, 2015, 10:26:39 AM
by cprobert
NHD-0216CW-AB3 displaying wrong chracters

Started by The Fat BastidBoard OLEDs

Replies: 0
Views: 2756
Last post April 13, 2017, 11:41:11 PM
by The Fat Bastid