Author Topic: NHD-3.5-320240MF-ASXV#-CTP Increase touch sensitivity  (Read 644 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-3.5-320240MF-ASXV#-CTP Increase touch sensitivity
« on: December 03, 2018, 08:27:23 AM »

We have purchased NHD-3.5-320240MF-ASXV#-CTP displays to our product where we need to use 2mm protective glass on front of display
The problem is I can't change sensitivity in FT-5x16 touch controller used in this version (0318)
It worked with FTx06 in older versions of display

Write to Address 80h and 81h worked fine in FTx06 but in FTx16 there is no change in sensitivity
Am I missing something?

Thanks in advance for any help



  • Administrator
  • Full Member
  • *****
  • Posts: 121
  • Karma: 4
    • View Profile
Re: NHD-3.5-320240MF-ASXV#-CTP Increase touch sensitivity
« Reply #1 on: December 03, 2018, 10:46:33 AM »
Hi pekka.k,

The default values for the FT-5x16 controller are different than the FT5x06 so the value range will be different.
Please refer to the FT5x16 controller register data for more details:
Let us know what values were working to get the proper sensitivity on the FT5x06 and the new value range you have tried.

Best Regards,


NHD‐2.4‐240320SF‐CTXL#‐FTN1 touch-screen problem

Started by hbcelebiBoard TFTs

Replies: 5
Views: 10156
Last post December 10, 2014, 11:19:05 AM
by Michael_L
NHD-5.0-800480TF-ATXL#-T and NHD-5.0-800480TF-20 Controller Board No Touch?

Started by dfanslerBoard TFTs

Replies: 5
Views: 7152
Last post May 26, 2017, 11:10:57 AM
by Saurabh_B
7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 5685
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
NHD-FT81X-Shield & NHD-7.0-800480-CSXU-T Resitive Touch not accurate

Started by A.SuppanzBoard TFTs

Replies: 3
Views: 811
Last post February 06, 2019, 09:03:08 AM
by Ted_M
NHD-4.3-480272EF-ASXN#-CTP touch controller interrupt signal

Started by Chris ElectronicsBoard TFTs

Replies: 2
Views: 5642
Last post May 20, 2016, 07:38:45 AM
by Chris Electronics