Author Topic: Connect NHD2.4-240320CF to ARM M0  (Read 970 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Connect NHD2.4-240320CF to ARM M0
« on: January 20, 2019, 11:52:37 PM »
I'm a little confused by the wiring diagram provided.  How am I supposed to connect the pins to an ARM M0 (Specifically and this TFT: ) Do I just connect CS, DC, WR, RD, DB0 to DB15 and RES to GPIOs?


  • Administrator
  • Full Member
  • *****
  • Posts: 139
  • Karma: 5
    • View Profile
Re: Connect NHD2.4-240320CF to ARM M0
« Reply #1 on: January 29, 2019, 08:42:21 AM »
Using the GPIO pins would be the correct way to connect the NHD-2.4-240320CF-CTXI#-F display to the ARM micro.  If you only use 8-bit parallel mode, connect the data pins DB8 to DB15 in order to save some GPIO pins for the other connections.

Best Regards,


Filling with blue yields flashing white screen (NHD-2.4-240320CF-CSXN#-F)

Started by asfarleyBoard TFTs

Replies: 2
Views: 2348
Last post December 11, 2018, 07:17:54 AM
by Paul_B
NHD-2.4-240320CF-CTXI#-FT (ST7789S controller) and STM32F4 FSMC LCD Interface

Started by deshayesBoard TFTs

Replies: 1
Views: 8116
Last post March 17, 2016, 06:25:18 PM
by fahad
NHDEV firmware to support NHD-2.4-240320CF-CTXI#-FT (ST7889S controller)

Started by deshayesBoard Evaluation Tools

Replies: 1
Views: 7197
Last post December 17, 2015, 09:52:29 AM
by Saurabh_B
NHD-2.4-240320CF-CSXN#-F works in 18 bits(262K colors) mode

Started by charlieBoard TFTs

Replies: 3
Views: 6272
Last post March 15, 2016, 10:39:50 AM
by Saurabh_B
Can't display a sample BMP image properly on NHD-2.4-240320CF-CTXI#-F with NHDev

Started by HidefumiMBoard Evaluation Tools

Replies: 3
Views: 2478
Last post December 28, 2018, 05:12:36 PM
by Alee_S