Author Topic: When is the heater required on NHD-C12864A1Z-FSB-FBW-HTT  (Read 1111 times)

gary_allbee

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
When is the heater required on NHD-C12864A1Z-FSB-FBW-HTT
« on: February 03, 2019, 10:06:04 AM »
I have a low power application required to operate in -40C operating temperature.
NHD-C12864A1Z-FSB-FBW-HTT display is rated for -40C but is that with the heater running or without the heater running?
When is the heater needed? 

Ted_M

  • Administrator
  • Full Member
  • *****
  • Posts: 134
  • Karma: 5
    • View Profile
Re: When is the heater required on NHD-C12864A1Z-FSB-FBW-HTT
« Reply #1 on: February 04, 2019, 08:39:15 AM »
Hi Gary,

This display is rated to -40C with the heater running.  With the heater off, it is rated to -30C.
As the temperature cools down to -30C, the contrast of the display will begin getting lighter.  Therefore, it is best to start heating before it gets down to -30C to maintain the contrast level as the display gets closer to -40C.

Best Regards,
« Last Edit: February 11, 2019, 10:58:26 AM by Ted_M »

 

NHD‐C12864A1Z‐FS(RGB)‐FBW‐HT1 Initialization

Started by BMohlmanBoard Graphic LCDs

Replies: 5
Views: 9567
Last post January 13, 2016, 07:44:16 AM
by Paul_B
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 13770
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD-C12864A1Z-FSRGB-FBW-HT1 boost speed (clear to black and black to clear)

Started by facotlBoard Graphic LCDs

Replies: 4
Views: 7358
Last post January 27, 2016, 10:18:45 AM
by facotl
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 5325
Last post April 19, 2017, 05:34:28 PM
by JimL
Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?

Started by andysBoard Graphic LCDs

Replies: 1
Views: 4029
Last post September 28, 2016, 08:36:06 AM
by Saurabh_B