Author Topic: Major Documentation Error! NHD-0216AW  (Read 982 times)

bjl

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Major Documentation Error! NHD-0216AW
« on: April 03, 2019, 12:36:29 PM »
Had some trouble with my SPI LCD controller.  Followed all the initialization and electrical specs (I have worked with LCD's before) and realized why I was having no success.  The datasheet depicts the mcu SDO line tied to the SDO line of the LCD.  Of course this shouldn't be!  However I thought it may have been a mixup in the naming convention, which is usually resolved by use of MISO, MOSI (master in slave out, master out slave in) naming convention.

I re-wired the mcu SDO line to the LCD SDI line (as it should be) and everything worked fine.  Very happy that the misconnection didn't damage either the mcu or the LCD output drivers.

I suggest a change to the datasheet to fix this error.

Ted_M

  • Administrator
  • Full Member
  • *****
  • Posts: 136
  • Karma: 5
    • View Profile
Re: Major Documentation Error! NHD-0216AW
« Reply #1 on: April 04, 2019, 11:27:06 AM »
Hi Bjl,

Thanks for your feedback.  We will update the diagram to show SDI to SDO as you correctly pointed out. 

This can easily be confused as it relates to MISO and MOSI connections for a Master and Slave SPI configuration.

Best Regards,



 

NHD-0216AW-SB3 - issue with writing characters to screen

Started by kokomojoeBoard OLEDs

Replies: 0
Views: 1774
Last post September 09, 2018, 07:29:49 PM
by kokomojoe
NHD-0216AW-IB3 - User Defined Characters - HOW?

Started by mproweBoard OLEDs

Replies: 0
Views: 13
Last post December 12, 2019, 01:58:30 PM
by mprowe
NHD-0216AW-IB3 with Arduino Uno Code example?

Started by mproweBoard OLEDs

Replies: 9
Views: 12242
Last post June 06, 2017, 10:04:59 AM
by mprowe
Example MikroC code for NHD-0216AW-IB3 I2C

Started by cbrun17Board OLEDs

Replies: 1
Views: 2723
Last post December 19, 2017, 05:23:30 PM
by Saurabh_B
How work with NHD-0216AW-SB3

Started by RacursBoard OLEDs

Replies: 1
Views: 6866
Last post May 17, 2017, 04:30:14 PM
by Saurabh_B