Author Topic: NHD-C0220BiZ- Series 2x20 Display mounting on PCB  (Read 4176 times)

m.sankar

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
NHD-C0220BiZ- Series 2x20 Display mounting on PCB
« on: March 21, 2014, 06:15:11 AM »
Hi i planned to use NHD-C0220BiZ-FS(RGB)-FBW-3VM LCD Display.
1. Is there any land pattern recommendation for the LCD display mounting ?
2. Is the Back-light LED contacts are flexible contact or through hole ?
3. If i want to stack the LCD display rather than mounting directly on PCB, do you have any recommendation for the LCD as well as back-light connectors?

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-C0220BiZ- Series 2x20 Display mounting on PCB
« Reply #1 on: March 21, 2014, 10:31:49 AM »
1. All we have available to assist with this is the information in the mechanical drawing on page 3 of the datasheet: http://www.newhavendisplay.com/specs/NHD-C0220BiZ-FSRGB-FBW-3VM.pdf.
We have a 3d model available for the white backlight version of this display if that would help (only the backlight contacts will be different between the two).
If you would like this model, please email us at nhtech@newhavendisplay.com
2. The backlight contacts are not flexible.  They are rectangular, thru-hole contacts.
3. We don't use this type of connector to test these displays, as they are meant to be soldered directly to the PCB.  We don't have any recommended connectors for this type of setup.
« Last Edit: November 04, 2015, 07:55:25 AM by Michael_L »

m.sankar

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: NHD-C0220BiZ- Series 2x20 Display mounting on PCB
« Reply #2 on: March 24, 2014, 12:41:23 AM »
Hi Michael, Thanks for the reply.

As i can see in the datasheet, the LED contacts have a length of 4.2mm, thickness of 0.6mm. What is the width of those contacts since you mentioned it as rectangular ?

Also i can see the LCD contacts also rectangular with 0.5mm width & 0.3mm thickness.

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-C0220BiZ- Series 2x20 Display mounting on PCB
« Reply #3 on: March 24, 2014, 08:08:00 AM »
The width of each backlight contact is 1.25mm.

 

NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 5417
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3195
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 8245
Last post July 10, 2014, 08:46:06 AM
by Michael_L
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 5384
Last post June 18, 2014, 10:09:49 AM
by Michael_L
Optical bonding Display to cover glass (dry film bonding)

Started by fourtraxBoard TFTs

Replies: 1
Views: 963
Last post September 29, 2016, 08:35:00 AM
by Saurabh_B