Author Topic: NHD-0420DZW-AY5 , Clear Display function  (Read 3461 times)

Bill_Shepherd

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-0420DZW-AY5 , Clear Display function
« on: March 21, 2014, 07:05:31 AM »
Hi,

I really can not understand why Newhaven have apparently binned years of support information from the forum, it means that your engineers are going to have to answer all the same questions again! Is the old forum out there somewhere so I can look stuff up still?

Anyhow... I want to understand the Clear Display function better. I take it from the datasheet that using function 0x01 should write 0x20 into all the DRAM, there by clearing the display.

I still seem to get spurious characters appearing in the positions that I have not addressed directly other than by using the clear display function.

Any thoughts?

Bill 

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-0420DZW-AY5 , Clear Display function
« Reply #1 on: March 21, 2014, 09:36:29 AM »
We were experiencing issues with the old forum, and we needed to make this new forum in hopes we would be able to import all previous posts.  Unfortunately we are not able to successfully perform this import, and therefore these old posts are now not available to view.  Of course you are right, it means many of the same questions will need to be answered, which is unfortunate for both our customers and us engineers!  :(  We deeply apologize for this complication, and any inconveniences it may cause, but we hope for this forum to be much better that the last, and easier to use with more features!

As for your clear display question, what interface are you using with this display?  Parallel? 4-bit or 8-bit? Serial?
All you are sending is command 0x01 and nothing else?  Once you send this command, that is when you are seeing these random characters?

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 4394
Last post May 13, 2014, 12:04:36 AM
by SteveC
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 5458
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3223
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 8329
Last post July 10, 2014, 08:46:06 AM
by Michael_L
Optical bonding Display to cover glass (dry film bonding)

Started by fourtraxBoard TFTs

Replies: 1
Views: 985
Last post September 29, 2016, 08:35:00 AM
by Saurabh_B