NHD-5.7-320240WFB-ETXI #-T-1-ND

[erps]

Hi:

I need a 32-position flat flex ribbon cable to connection the signals from the display to the uC board.
Do you provide for that?

Another question, the datasheet on page 4 shows connector CON2 as the interface connector. However, on the board it is shown as CON3 (picture attached), which one is correct?

Thanks,

[attachment deleted by admin]

[Michael_L]

Yes, we have a 32-pin FFC available here: http://www.newhavendisplay.com/32-pos-ffc-p-3764.html
As for the interface connector, it is CON3 (the 32-pin connector).

[erps]

I am going to use the interface board NHD-FFC36-ND.
Can you provide dimensions on that board?
Distance between Mounting Holes?
Thanks,

[Michael_L]

The dimensions and pitch can be seen on our website for that product: http://www.newhavendisplay.com/nhdffc36-p-2476.html
52mm x 40mm, 0.5mm pitch FFC connector, 2.54mm pitch thru-hole.