Author Topic: NHD-5.7-320240WFB-ETXI #-T-1-ND  (Read 2522 times)

erps

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
NHD-5.7-320240WFB-ETXI #-T-1-ND
« on: October 15, 2014, 11:02:03 AM »
Hi:

I need a 32-position flat flex ribbon cable to connection the signals from the display to the uC board.
Do you provide for that?

Another question, the datasheet on page 4 shows connector CON2 as the interface connector. However, on the board it is shown as CON3 (picture attached), which one is correct?

Thanks,

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-5.7-320240WFB-ETXI #-T-1-ND
« Reply #1 on: October 16, 2014, 08:28:37 AM »
Yes, we have a 32-pin FFC available here: http://www.newhavendisplay.com/32-pos-ffc-p-3764.html
As for the interface connector, it is CON3 (the 32-pin connector).

erps

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD-5.7-320240WFB-ETXI #-T-1-ND
« Reply #2 on: October 16, 2014, 09:06:29 AM »
I am going to use the interface board NHD-FFC36-ND.
Can you provide dimensions on that board?
Distance between Mounting Holes?
Thanks,

Michael_L

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 33
    • View Profile
Re: NHD-5.7-320240WFB-ETXI #-T-1-ND
« Reply #3 on: October 17, 2014, 08:15:09 AM »
The dimensions and pitch can be seen on our website for that product: http://www.newhavendisplay.com/nhdffc36-p-2476.html
52mm x 40mm, 0.5mm pitch FFC connector, 2.54mm pitch thru-hole.

 

NHD-5.7-320240WFB speed up Background

Started by JeanDubucBoard TFTs

Replies: 1
Views: 1867
Last post February 02, 2015, 03:15:27 PM
by Michael_L
NHD-5.7-320240WFB-CTXI #-T-1

Started by karimaly08Board TFTs

Replies: 7
Views: 4227
Last post November 05, 2014, 05:10:20 AM
by karimaly08
NHD-5.7-320240WFB-ETXI #-T-1

Started by erpsBoard TFTs

Replies: 1
Views: 2373
Last post December 04, 2014, 03:24:37 PM
by Michael_L