Author Topic: NHD-1.8-128160EF-CTXI ili9163 & SAM3s driver help needed  (Read 1730 times)

Jsaggio

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-1.8-128160EF-CTXI ili9163 & SAM3s driver help needed
« on: February 01, 2016, 01:02:58 AM »
Hello...I've inherited a PCB using the noted display with 8 bit parallel interface using a SAM3s. It's an embedded application where economy and speed of I/O to display are quite important.

I've scoured the net and also seen the code samples here for Arduino and PIC but I'm wondering if I can get some help from NHD getting up and running with the SAM3s and the 9163. I'm interested in an efficient and fast set of C functions as well as all tips and hints so that I do not spend time reinventing the wheel.

I would be happy to provide contact info in order to talk offline.

 

NHD-2.4-240320CF-CTXI#-FT (ST7789S controller) and STM32F4 FSMC LCD Interface

Started by deshayesBoard TFTs

Replies: 1
Views: 2685
Last post March 17, 2016, 06:25:18 PM
by fahad
NHDEV firmware to support NHD-2.4-240320CF-CTXI#-FT (ST7889S controller)

Started by deshayesBoard Evaluation Tools

Replies: 2
Views: 2647
Last post November 23, 2017, 03:56:56 AM
by tolikkk
NHD-2.4-240320CF-CTXI#-FT ribbon cable question

Started by tom66888Board TFTs

Replies: 1
Views: 2196
Last post October 02, 2015, 08:29:03 AM
by Saurabh_B
ATSAM4E -NHD-2.4-240320CF-CTXI#-F - White Screen

Started by gentlemannBoard TFTs

Replies: 2
Views: 2117
Last post February 18, 2016, 01:08:35 PM
by Paul_B
Sample Code for NHD-2.4-240320CF-CTXI with UNO or Metro

Started by fahadBoard TFTs

Replies: 1
Views: 2039
Last post March 18, 2016, 08:42:03 AM
by Paul_B