Author Topic: NHD-C12864A1Z-FSRGB-FBW-HT1 boost speed (clear to black and black to clear)  (Read 2622 times)

facotl

  • Newbie
  • *
  • Posts: 8
  • Karma: 2
    • View Profile
Hello,

Is there any initialisation setting that can improve display speed (clear to black and black to clear speeds) ?


Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Hi,

There is a command to turn all points on.

Using command #10, 0xA5 will turn all points of the display ON.
You can reverse this by using 0xA4 (Normal display).

facotl

  • Newbie
  • *
  • Posts: 8
  • Karma: 2
    • View Profile
Hello,

Thank you for the response.
Maybe i not explicated my problem very well.
It's not a full screen of one color. It's an industrial display and i wish to update strings up to 3 to 4 times per second with a good lisibility. I noticed that when i draw a new string, time to be "clear" is around an half of second.

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Would it be possible to share the segments of code that write the pixels and clear the display.

The clear and fill could possibly be sped up by speeding up how fast you write to the display.

The display has a 400 ns Serial clock period, and theoretically you could fill the whole display in about 3ms.
If you are calling for delays within the write command this could greatly reduce the time it takes clear or fill the screen.

facotl

  • Newbie
  • *
  • Posts: 8
  • Karma: 2
    • View Profile
Hello,
It's about the pixel reactivity. I measured with scopemeter and i fill all the screen in about 10 ms. But the pixels that change from clear to black looks leasy (you can see the grey transition). The ones that change from black to clear are fast enough (you don't see the transition).

 

NHD‐C12864A1Z‐FS(RGB)‐FBW‐HT1 Initialization

Started by BMohlmanBoard Graphic LCDs

Replies: 5
Views: 3949
Last post January 13, 2016, 07:44:16 AM
by Paul_B
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 12
Views: 5760
Last post November 24, 2017, 11:47:00 PM
by tolikkk
NHD-C12864A1Z not listed in NHDev Supported Displays List

Started by JimLBoard Evaluation Tools

Replies: 1
Views: 844
Last post April 19, 2017, 05:34:28 PM
by JimL
Current limiting resistors needed for NHD-C12864A1Z-FS(RGB)-FBW-HT1?

Started by andysBoard Graphic LCDs

Replies: 1
Views: 1185
Last post September 28, 2016, 08:36:06 AM
by Saurabh_B
Help Getting ArduinoPro Mini 3.3V and NHD-C12864A1Z-FSW-FBW-HTT to work via SPI

Started by dalemooreBoard Graphic LCDs

Replies: 5
Views: 1436
Last post September 23, 2016, 07:44:35 AM
by Paul_B