Author Topic: 2.4" LCD module viewing angle  (Read 1618 times)

greyscale

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
2.4" LCD module viewing angle
« on: January 23, 2016, 09:59:54 PM »
I have a physical height limit of about 44mm, and was considering using the NHD-2.4-240320CF-CSXN#-F module but rotate it 90. The spec sheet says "grey scale inversion: 12 o'clock" - what kind of viewing angle are we talking about before that becomes noticeable?

Alternatively, are there other displays with the connector on the side (to maximize my vertical active area) that are sunlight readable?

edit - looks like there's more discussion about similar displays on the TFT forum, but I haven't figured out how to move the post from the graphical lcd forum...
« Last Edit: January 23, 2016, 11:30:54 PM by greyscale »

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 355
  • Karma: 10
    • View Profile
Re: 2.4" LCD module viewing angle
« Reply #1 on: January 25, 2016, 11:21:09 AM »
Hi,

The 2.4" TFT has an optimal 65 Viewing Angle in all directions. The 12 o'clock grayscale inversion shouldn't be an issue until you go past that.

Unfortunately we do not have any other displays that will match your height limit. Our other TFTs are much larger.

 

7.0" TFTs with capacitive Touch and 8080 interface availability?

Started by gdoraisaBoard TFTs

Replies: 1
Views: 1220
Last post June 30, 2016, 07:54:11 AM
by Saurabh_B
16-bit controller Board (SSD1963) for 5.7" QVGA TFT display

Started by erpsBoard Evaluation Tools

Replies: 1
Views: 2959
Last post September 17, 2015, 02:25:46 PM
by Saurabh_B
Program snippet for writing to Newhaven Display 7.0" TFT

Started by ssd1963Board TFTs

Replies: 1
Views: 2240
Last post October 30, 2015, 12:24:44 PM
by Michael_L
Question on the SSD1351 oled 1.5" display

Started by josephchrzempiecBoard OLEDs

Replies: 0
Views: 2760
Last post July 19, 2015, 02:48:45 PM
by josephchrzempiec
7" capacitive touch radiated emissions

Started by brichingBoard TFTs

Replies: 1
Views: 2005
Last post February 05, 2016, 08:48:56 AM
by Paul_B