Author Topic: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano  (Read 3029 times)

amitkumarsharma008

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Hi  NewHeaven team,

I am new to Arduino world and currently using the OLED display of 0.96 inch (VCC, GND, SCL, SDA) with arduino nano. Now when I came to your website, i find intresting colour OLED's (NHD-1.69-160128ASC3 - ssd1351/seps25) but i want to know exact wiring to be done with Arduino nano. I tried to search any tutorial etc on the internet but unable to do so. I search data sheets but its currently difficult to understand.
If I get this information clearly i will go ahead and buy this oled display and will be useful for my project.
I have one more serial device as GPS receiver also connected to arduino nano. So please consider that while replying. I can not use the shield for arduino uno because it increases the size of my project.

Thanks for your help in advance !!

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Re: Wiring connectiond between NHD-1.69-160128ASC3 SSD1351 and Arduino Nano
« Reply #1 on: February 11, 2016, 08:33:43 AM »
Morning,

The Arduino Nano is a compact and breadboard-friendly version board based on ATmega328 processor. It is more or less same functionality as the Arduino UNO but in different package (which means it won't accept any shields designed for the UNO). However since you are using NHD-1.69-160128ASC3 you can simply breadboard your project  8)

First check out the pin-out diagram for the Arduino Nano.
Link: http://bit.ly/1PF7FLp

We provide getting started code, however it is configured for the Arduno Uno. You will need to modify the sketch with the following pin configuration:

https://github.com/NewhavenDisplay/NHD-1.69-160128ASC3_Example/blob/master/examples/test/test.ino

Code: [Select]
Hardware: (Note most of these pins can be swapped)
    Color OLED Pin----------------Arduino Pin
       MOSI       ----------------  15
       SCK        ----------------  17
       DC         ----------------  12
       RESET      ----------------  13
       OLEDCS     ----------------  14
       Vin        ----------------  5V or 3.3V
       GND        ----------------  GND

Feel free to follow along with our Serial Color OLED User Guide, the only difference is you are using an Arduino Nano and will be wiring your display slightly different.

http://www.colorarduino.newhavendisplay.com/userguides/NHD-1.69-160128ASC3_User_Guide.pdf

Hope this helps!

« Last Edit: April 29, 2016, 11:54:11 AM by Paul_B »

amitkumarsharma008

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Thanks a lot !!

I am able to successfully do the connection.

Now I want a small clarification regarding "NHD-1.5-128128ASC3" and "NHD-1.5-128128UGC3".

NHD-1.5-128128ASC3 have MOSI pin and NHD-1.5-128128UGC3 have SDIN as pin8.

So are they equivalent ?

Thanks & Regards,
Amit

Paul_B

  • Administrator
  • Sr. Member
  • *****
  • Posts: 248
  • Karma: 16
    • View Profile
Not a problem Amit,  "SDIN" stands for Serial Data In

e.g. MOSI

Enjoy your new display!


 

Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 8775
Last post July 10, 2014, 08:46:06 AM
by Michael_L
MOVED: 320x240 sunlight readable dispaly to arduino + library

Started by Michael_LBoard Customer Projects

Replies: 0
Views: 2417
Last post October 23, 2015, 11:45:28 AM
by Michael_L
320x240 sunlight readable dispaly to arduino + library

Started by vonz66Board Graphic LCDs

Replies: 1
Views: 3026
Last post October 23, 2015, 11:46:04 AM
by Michael_L
NHD-0420D3Z-NSW-BBW-V3 i2c display and Arduino missing characters

Started by 0miker0Board Character LCDs

Replies: 0
Views: 625
Last post July 06, 2017, 11:05:59 AM
by 0miker0
Arduino MEGA 2560 + NHD240128

Started by tvieilBoard Graphic LCDs

Replies: 6
Views: 7677
Last post May 06, 2014, 12:03:50 PM
by Michael_L