Author Topic: OLED In-rush current  (Read 1883 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
OLED In-rush current
« on: February 25, 2016, 09:21:43 AM »

I am having an issue with the NHD-2.7-12864UCY3 drawing very high currents when waking up (0xAF) from extended sleep times (>30 min).

The display is powered by 3.0V and has a 100uF decoupling capacitor just beside it. I am seeing the supply drop to ~2.4 V twice, just after wake up.

Can I set something on the display to reduce the in-rush currents during wake up, but change it later? Maybe ramp up an internal voltage slowly to spread out the in-rush current?

Thank you.


  • Newbie
  • *
  • Posts: 5
  • Karma: 2
    • View Profile
Re: OLED In-rush current
« Reply #1 on: May 03, 2016, 03:26:58 AM »
What is your PCB design like for the power rails to the OLED? Do you have sufficiently wide ground and power rails to it?

Where are you measuring the voltage drop? At the OLED?


16x2 OLED NHD-0216KZW-AY5 Intermittent, and perament vertical dots Brightness

Started by BenB2013Board OLEDs

Replies: 8
Views: 4695
Last post November 23, 2017, 07:28:23 PM
by tolikkk
Wiring between NHD-1.5128128ASC3ND OLED Display and NHDev 2.10 Development Board

Started by vcp88Board OLEDs

Replies: 5
Views: 2114
Last post Today at 09:24:21 AM
by tolikkk
NHD-0420DZW-AG5 OLED character module--Displaying junk data

Started by control3Board OLEDs

Replies: 9
Views: 1171
Last post Today at 08:16:44 AM
by tolikkk
Korean Hex GB code for OLED multi font display NHD-2.7-12864UMY3

Started by newhavenuserBoard OLEDs

Replies: 3
Views: 687
Last post November 23, 2017, 07:57:43 PM
by tolikkk
OLED Character display - Some commands don't work

Started by wedgeBoard Character LCDs

Replies: 4
Views: 3142
Last post Today at 03:45:10 PM
by tolikkk