Author Topic: NHD‐0420CW‐AG3: blinking part of text?  (Read 2163 times)

RichardR

  • Newbie
  • *
  • Posts: 6
  • Karma: 0
    • View Profile
NHD‐0420CW‐AG3: blinking part of text?
« on: March 02, 2016, 07:06:21 AM »
Hello,
I have one more question about the NHD‐0420CW‐AG3 OLED display: is it possible to make some text blink?

I'm using the display to control a machine, and in some situations, I want to show the word 'PAUSED' blinking, with the rest of the text static. I found blink on/off functions for the cursor and for the display as a whole, but not for just part of the text, e.g. defined like this:

[text (static)]
[command: blink enable]
[text (blinking)]
[command: blink disable]
[text (static)]

Or do I have to take care of this myself, periodically overwriting the blink text with spaces?

Thanks once more in advance,

Richard Rasker

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 341
  • Karma: 10
    • View Profile
Re: NHD‐0420CW‐AG3: blinking part of text?
« Reply #1 on: March 02, 2016, 01:22:52 PM »
Richard,

Unfortunately there are no commands that allow you to partially make text blink.
You will have to delete and rewrite the text you would want blinking. 

BobG

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
    • View Profile
Re: NHD‐0420CW‐AG3: blinking part of text?
« Reply #2 on: February 28, 2017, 03:27:02 PM »
You can blink the user-defined characters.  Check out the US2066 controller manual, available from the product description page.
If you're not otherwise using those characters, you coud redefine them any time you want - so long as you don't need more than 8 different characters/letters at the same time.  Also, make sure you are using one of the fonts that lets you "see" the CGRAM characters.   Look at the Function Selection B command and Section 5.13.

 

0420CW-AB3 I2C Talking, Display is off and low current drawn

Started by AreswayBoard OLEDs

Replies: 3
Views: 2662
Last post February 10, 2015, 07:39:49 AM
by Paul_B
NHD-0420CW-AG3 MPU Interface Pin Selection and Power Supply

Started by blaubaerBoard OLEDs

Replies: 14
Views: 5791
Last post April 20, 2015, 03:51:06 PM
by oldmaker
NHD-0420DZW-AY5 vs 763-NHD-0420CW-AY3 for brightness and power consumption

Started by timmwalkBoard OLEDs

Replies: 1
Views: 1664
Last post December 07, 2015, 08:37:17 AM
by Saurabh_B
Light Streaking on NHD-0420CW-AB3 Display w/ I2C rewrites

Started by BobGBoard OLEDs

Replies: 2
Views: 715
Last post March 02, 2017, 10:43:50 AM
by BobG
interface voltage levels for NHD-0420CW

Started by oldmakerBoard OLEDs

Replies: 3
Views: 2347
Last post February 12, 2015, 01:56:20 PM
by Paul_B