Author Topic: 3V3 microprocessor parallel interface with 5V display (NHD-0212WH-ATMI-JT)  (Read 3563 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Hi, I'm going to use a microprocessor supplied with 3V3.
NHD-0212WH-ATMI-JT display must be supply at 5V0.

Considering parallel communication (bidirectional), Is there a way to obtain a communication between uC and display without using bidirectional level translator?


  • Administrator
  • Hero Member
  • *****
  • Posts: 384
  • Karma: 10
    • View Profile
Without using a Voltage translator its hard to say what whether the controller will recognize the 3.3v bits as a '1'.
There would also be issues with the contrast when powered with a 3.3v input.

We would be able to offer this display as a 3.3V display, however this will require a MOQ.
If you are interested in this option please email


Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 3
Views: 9901
Last post May 13, 2014, 12:04:36 AM
by SteveC
Display NHD-4.3-480272EF-ASXN#-T and NHD-4.3-480272EF-ASXN#-T revA

Started by rvalorBoard TFTs

Replies: 1
Views: 177
Last post April 25, 2019, 03:35:10 PM
by Ted_M
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 6
Views: 11911
Last post November 07, 2014, 08:25:20 AM
by Michael_L
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 8639
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 9
Views: 18369
Last post July 10, 2014, 08:46:06 AM
by Michael_L