Author Topic: 3V3 microprocessor parallel interface with 5V display (NHD-0212WH-ATMI-JT)  (Read 2017 times)

Ste

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Hi, I'm going to use a microprocessor supplied with 3V3.
NHD-0212WH-ATMI-JT display must be supply at 5V0.

Considering parallel communication (bidirectional), Is there a way to obtain a communication between uC and display without using bidirectional level translator?


Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Without using a Voltage translator its hard to say what whether the controller will recognize the 3.3v bits as a '1'.
There would also be issues with the contrast when powered with a 3.3v input.

We would be able to offer this display as a 3.3V display, however this will require a MOQ.
If you are interested in this option please email nhtech@newhavendisplay.com.

 

Blank Display on NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM

Started by SteveCBoard Character LCDs

Replies: 5
Views: 4583
Last post Today at 10:40:50 AM
by tolikkk
NHD‐C12864A1Z‐FSW‐FBW‐HTT display clears after draw

Started by EdAverillBoard Graphic LCDs

Replies: 7
Views: 5723
Last post Today at 02:14:24 AM
by tolikkk
NHD‐4.3‐480272EF‐ATXL#‐CTP | FAN5333 | BBB | Nothing on the Display

Started by Alias_AliasBoard TFTs

Replies: 1
Views: 3431
Last post September 25, 2015, 03:09:24 PM
by Paul_B
Arduino LCD library not working with newhaven display NHD‐0420H1Z‐FL‐GWB-3V3

Started by c2hollowBoard Character LCDs

Replies: 13
Views: 8861
Last post Today at 12:12:05 PM
by tolikkk
NHD-0420DZW-AG5 - Display "sometimes" shows only 2 lines

Started by stylonurusBoard OLEDs

Replies: 5
Views: 5597
Last post June 18, 2014, 10:09:49 AM
by Michael_L