Author Topic: NHD-2.4-240320CF-CTXI#-FT  (Read 1654 times)

amodmujumdar

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
NHD-2.4-240320CF-CTXI#-FT
« on: April 07, 2016, 06:32:52 AM »
Hi,

I am using LCD module in one of our product design as NHD-2.4-240320CF-CTXI#-FT 

For reliability testing I would like to test stand alone LCD without micro controller interface.

First to make All pixels ON - & then set colour to BLACK

   
1. If we pulled up data lines high or low then can this be written to LCD without use of any micro controller ? In such case what shall be the condition for control signals?

2. Can any body share  any application note / Schematic for this ? If available.

Thanks in advance

Amod

Saurabh_B

  • Administrator
  • Hero Member
  • *****
  • Posts: 356
  • Karma: 10
    • View Profile
Re: NHD-2.4-240320CF-CTXI#-FT
« Reply #1 on: April 26, 2016, 08:01:50 AM »
This was solved through email.

It is not possible to test the display without using a microcontroller.
You would need to initialize the display then change all off the pixels to black using the controller.

 

NHD-1.8-128160EF-CTXI ili9163 & SAM3s driver help needed

Started by JsaggioBoard TFTs

Replies: 0
Views: 1725
Last post February 01, 2016, 01:02:58 AM
by Jsaggio
NHD-1.8-128160EF-CTXI# problem: becomes pale after using it for some time

Started by fvdhoefBoard TFTs

Replies: 1
Views: 2962
Last post July 31, 2014, 08:55:40 AM
by Michael_L
Writing Character strings to NHD-1.8-128160EF-CTXI#

Started by JeffJwayBoard TFTs

Replies: 3
Views: 2644
Last post July 13, 2016, 09:45:21 AM
by Michael_L
NHD-7.0-800480WF-CTXI# initial problem

Started by cwparkBoard TFTs

Replies: 0
Views: 2150
Last post December 02, 2014, 06:22:04 AM
by cwpark
NHD-1.8-128160EF-CTXI#-F has a display buffer?

Started by statelogicBoard TFTs

Replies: 2
Views: 2624
Last post January 09, 2015, 07:47:13 PM
by statelogic